| Customization: | Available |
|---|---|
| Type: | Adhesive Mortar |
| Purity: | 99% Mmin |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydroxypropyl Methylcellulose (HPMC) is an odorless, non-toxic white powder. After fully dissolved in water, it will form a transparent viscous solution. It is a non-ionic cellulose ether made from natural polymer materials through a series of chemical processing. It has the characteristics of thickening, adhesion,dispersion,emulsification, film formation, suspension,adsorption, gelation, surface activity, retention of moisture and protection of colloids.
HPMC For Wall Putty
Skim coat (also named by Wall Putty) is a decorative and functional trowelling plaster material for interior or external wall construction. It's function is to remove uneven defects on the surface of the base materials of wall, and eliminate the stress between different coating layers.
HPMC For EIFS
ETIFS/ETICS is a kind of thermal insulation structure which is installed on the surface of exterior wall. It can reduce the influence of thermal bridge and deformation stress on the base wall. This products can give effectively improvement on the water retention, anti-stress cracking, open time, sag resistance, workability of the ETICS mortars.
HPMC for Self-leveling Mortar
This products gives the rheology and workability of the full range of flooring formulations. Improves ease of on-site application and ensuring exceptionally smooth, defect-free surfaces.
| Beipeng cementitious self-leveling compound Specification Standard | ||||||||
| Physical and dynamics properties | ||||||||
| surface layer | cushion layer | |||||||
| fluidity (mm) | at the beginning | ≥130 | ||||||
| in 20 mins | ≥130 | |||||||
| Flexural capacity | Mpa | ≥ 1.5 | ≥ 1.0 | |||||
| Rate of size change | % | -0.10 ~ +0.10 | -0.15 ~ +0.15 | |||||
| Impact resistance | No cracking or detachment from bottom plate | |||||||
| 24h compressive strength | Mpa | ≥6.0 | ||||||
| 24h flexural strength | Mpa | ≥2.0 | ||||||
| Friction resistance | mm3 | ≤400 | ≤800b | |||||
| Compressive strength class requirements (28d) | ||||||||
| C16 | C20 | C25 | C30 | C35 | C40 | C50 | ||
| surface layer | (≥) Mpa | - | - | 25 | 30 | 35 | 40 | 50 |
| cushion layer | 16 | 20 | 25 | 30 | 35 | 40 | - | |
| Flexural strength grade requirements (28d) | ||||||||
| F4 | F6 | F7 | F8 | F10 | ||||
| surface layer | (≥) Mpa | - | 6 | 7 | 8 | 10 | ||
| cushion | 4 | 6 | 7 | 8 | 10 | |||
){kind=link}